Gearing Arrangement: Cycloidal
Output Torque: 2.6-1195N.M
Input Pace: 300-1800Rpm
Output Pace: .sixteen-1571r/min
cycloidal gearbox: Cycloidal Gearbox Reducer
Color: Blue
Solution title: BLD Cycloid Velocity Reducer
Software: Mining Plant
Material: Steel
Bearing: NSK
Certificate: ISO9001
Ratio: 5-a hundred
Mounting Placement: Vertical (flange Mounted)
Enter Kind: IEC Flange
Packaging Specifics: picket box

Cycloidal gear reducer is a theory adopted K-H-V Planetary Gear less innovative gear. Its transmission approach as follows : enter shaft outfitted with a one hundred eighty-diploma dislocation of the double eccentric sets, changed with 2 eccentric change as a roller bearing arm, the formation of H-, 2 cycloid round gap at the middle shall uplink Eccentric Roller Bearings arm, which cycloidal gear needle spherical and meshing section, comprising a variation of the enamel meshing with the gearbox.

Variety	stage	Model	Ratio	Nominal Electricity (KW)	Nominal Torque(N.m)
X/B Series Cycloidal Reducer	Single reducer	B09/X1	9-87	.55-.18	26-50
		B0/X2		one.1-.eighteen	58-112
		B1/X3		.55-.18	117-230
		B2/X4		4-.fifty five	210-four hundred
		B3/X5		eleven-.55	580-1571
		B4/X6/X7		11-2.2	580-1670
		B5/X8		18.5-2.two	1191-3075
		B6/X9		fifteen-5.five	5183-5605
		B7/X10		eleven-forty five	7643

Sort	phase	Product	Ratio	Nominal Electrical power (KW)	Nominal Torque(N.m)
X/B Sequence Cycloidal reducer	Double reducer	B10/X32	99-7569	.37-.18	175
		B20/X42		1.1-.18	600
		B31/X53		two.2-.twenty five	1250
		B41/X63		two.2-.twenty five	1179-2500
		B42/X64		four-.fifty five	2143-2500
		B52/X84		4-.55	2143-5000
		B53/X85		seven.5-.55	5000
		B63/X95		7.5-.fifty five	5893-8820
		B74/X106		eleven-2.two	11132-12000
		B84/X117		11-2.2	11132-16000

Main AttributesAll planetary cycloidal reducer rotating unit can be divided into 3 areas:enter portion,deceleration portion and output portion.
Dislocation on the enter shaft is geared up with a 180℃ of double eccentric sleeve,geared up with 2 ball bearings on the eccentric sleeve,the formation of H 2 cycloid equipment center hole is the eccentric sleeve on the turning arm bearing raceway,and by a groud of cycloid equipment and pin gear ring of gear meshing,considerably less bad tooth meshing reduction mechanism to kind,(in buy to lessen friction,in modest ratio of pace reducer,the needle with needle enamel on the gear set).When the enter shaft with eccentric sleeve rotation for a week,as a consequence of the cycloid gear tooth profile curve traits and restricted by needle on the gear enamel,the movement of the cycloid equipment becoming both revolution and rotation of the airplane motion,and input shaft aremade for a 7 days,eccentric sleeve also change the 7 days,cycloid gear in the opposite course around a huge tooth distinction reduction is attained, then with the help pf W output mechanism,the cycloid gear rotates at minimal velocity movement by means of the pin shaft,handed to the output shaft,lower output pace can be achieved.
Traits:1.Cycloid reducer large reduction ratio, high effectiveness: a reduction equipment ratio is 9~87, Low Noise Bearing NU319 ECMC3 Lina cylindrical roller bearing NU319 ECM ECP the two-stage reduction gear ratio is 121 ~ 5133, multistage mixture can reach tens of countless numbers, and the needle tooth meshing line variety rolling friction, the meshing surface no relative sliding, so a reduction performance of 94%.2.Pin wheel reducer easy working, lower sounds: the teeth make contact with at the identical time when in operation, the coincidence degree large, secure operating, sturdy overload capacity, low vibration and noise, a variety of designs, tiny sound.3. The use of dependable, lengthy existence: because the primary component is manufactured of large carbon alloy steel quenching (HRC58-sixty two), and then grinding, and cycloid equipment and pin equipment set mesh transfer to the pin gear sort rolling friction pair, friction coefficient is modest, so that the meshing zone no relative sliding, wear little, so tough.4. Compact framework, small quantity: when compared with other reducer with the energy of the over fat, tiny volume 1/3, as is the planetary transmission, the input shaft and the output shaft in the same axis, in order to obtain the smallest attainable dimensions.
Our Business HangZhou Yinxin Electromechanical Services Co. LtdHangZhou Yinxin Electromechanical Equipment Co., Ltd.is a present enterprise integrating growth, EVERLIN brand original Chi Cheng Planetary Gearbox MP280L style, generation and product sales,Main selling merchandise incorporate reducer motor,drinking water pump,development equipment and areas,bearings,hardware and electrical products,plastic items,Labour safety appliance.Our organization often adhere to the procedure idea which includes folks-oriented, innovation as the soul,be ready for threat in moments of peace, unremitting……
Software spot Certifications Income territory Packing & Shipping and delivery

Packaging
Size	five hundred (L) * five hundred (W) * four hundred (D)
Excess weight	one.2 T
Packaging Specifics	The standard deal is picket box(Measurement: L*W*H). If export to european nations around the world,the picket box will be fumigated.If container is way too tigher,we will use pe movie for packing or pack it in accordance to clients special ask for.

Packaging
Dimensions	500 (L) * 500 (W) * 400 (D)
Bodyweight	one.2 T
Packaging Specifics	The typical package is picket box(Dimension: L*W*H). If export to european international locations,the picket box will be fumigated.If container is as well tigher,we will use pe film for packing or pack it according to consumers specific request.

FAQQ1: Are you trading firm or maker ?A: We are a company in ZheJiang China.welcome to our factory to have a check out.
Q2: How we decide on designs and technical specs?A:You can email us the series name & code (for case in point: WJ series worm reducer) as properly as necessity details, these kinds of as motor electrical power, output velocity or ratio, services aspect or your application…as considerably knowledge as attainable. If you can supply some photographs or drawings, it is better.
Q3: How is your value? Can you supply any low cost?A: We will give the best value we can base on your needs and the quantities.
This fall: How lengthy ought to I hold out for the comments soon after I deliver the enquiry?A: In 12 several hours.
Q5: What is your merchandise guarantee period of time?A:We provide 1 12 months guarantee considering that the vessel departure date still left China.
Q6: What industries are your gearboxes being utilized?A:Our gearboxes are commonly applied to metallurgical equipment, mining equipment, automation gear, foodstuff equipment, 42zyt01A 12 Volt 24 Volt DC Motor, Rated 3500rpm, 38mnm packaging products, tobacco gear and so on.

Choosing a Gearbox For Your Application

The gearbox is an essential part of bicycles. It is used for several purposes, including speed and force. A gearbox is used to achieve one or both of these goals, but there is always a trade-off. Increasing speed increases wheel speed and forces on the wheels. Similarly, increasing pedal force increases the force on the wheels. This makes it easier for cyclists to accelerate their bicycles. However, this compromise makes the gearbox less efficient than an ideal one.

Dimensions

Gearboxes come in different sizes, so the size of your unit depends on the number of stages. Using a chart to determine how many stages are required will help you determine the dimensions of your unit. The ratios of individual stages are normally greater at the top and get smaller as you get closer to the last reduction. This information is important when choosing the right gearbox for your application. However, the dimensions of your gearbox do not have to be exact. Some manufacturers have guides that outline the required dimensions.
The service factor of a gearbox is a combination of the required reliability, the actual service condition, and the load that the gearbox will endure. It can range from 1.0 to 1.4. If the service factor of a gearbox is 1.0, it means that the unit has just enough capacity to meet your needs, but any extra requirements could cause the unit to fail or overheat. However, service factors of 1.4 are generally sufficient for most industrial applications, since they indicate that a gearbox can withstand 1.4 times its application requirement.
Different sizes also have different shapes. Some types are concentric, while others are parallel or at a right angle. The fourth type of gearbox is called shaft mount and is used when mounting the gearbox by foot is impossible. We will discuss the different mounting positions later. In the meantime, keep these dimensions in mind when choosing a gearbox for your application. If you have space constraints, a concentric gearbox is usually your best option.

Construction

The design and construction of a gearbox entails the integration of various components into a single structure. The components of a gearbox must have sufficient rigidity and adequate vibration damping properties. The design guidelines note the approximate values for the components and recommend the production method. Empirical formulas were used to determine the dimensions of the various components. It was found that these methods can simplify the design process. These methods are also used to calculate the angular and axial displacements of the components of the gearbox.
In this project, we used a 3D modeling software called SOLIDWORKS to create a 3-D model of a gear reducer. We used this software to simulate the structure of the gearbox, and it has powerful design automation tools. Although the gear reducer and housing are separate parts, we model them as a single body. To save time, we also removed the auxiliary elements, such as oil inlets and oil level indicators, from the 3D model.
Our method is based on parameter-optimized deep neural networks (DBNs). This model has both supervised and unsupervised learning capabilities, allowing it to be self-adaptive. This method is superior to traditional methods, which have poor self-adaptive feature extraction and shallow network generalization. Our algorithm is able to recognize faults in different states of the gearbox using its vibration signal. We have tested our model on two gearboxes.
With the help of advanced material science technologies, we can now manufacture the housing for the gearbox using high-quality steel and aluminium alloys. In addition, advanced telematics systems have increased the response time of manufacturers. These technologies are expected to create tremendous opportunities in the coming years and fuel the growth of the gearbox housing market. There are many different ways to construct a gearbox, and these techniques are highly customizable. In this study, we will consider the design and construction of various gearbox types, as well as their components.

Working

A gearbox is a mechanical device that transmits power from one gear to another. The different types of gears are called planetary gears and are used in a variety of applications. Depending on the type of gearbox, it may be concentric, parallel, or at a right angle. The fourth type of gearbox is a shaft mount. The shaft mount type is used in applications that cannot be mounted by foot. The various mounting positions will be discussed later.
Many design guidelines recommend a service factor of 1.0, which needs to be adjusted based on actual service conditions. This factor is the combined measure of external load, required reliability, and overall gearbox life. In general, published service factors are the minimum requirements for a particular application, but a higher value is necessary for severe loading. This calculation is also recommended for high-speed gearboxes. However, the service factor should not be a sole determining factor in the selection process.
The second gear of a pair of gears has more teeth than the first gear. It also turns slower, but with greater torque. The second gear always turns in the opposite direction. The animation demonstrates this change in direction. A gearbox can also have more than one pair of gears, and a first gear may be used for the reverse. When a gear is shifted from one position to another, the second gear is engaged and the first gear is engaged again.
Another term used to describe a gearbox is “gear box.” This term is an interchangeable term for different mechanical units containing gears. Gearboxes are commonly used to alter speed and torque in various applications. Hence, understanding the gearbox and its parts is essential to maintaining your car’s performance. If you want to extend the life of your vehicle, be sure to check the gearbox’s efficiency. The better its functioning, the less likely it is to fail.

Advantages

Automatic transmission boxes are almost identical to mechanical transmission boxes, but they also have an electronic component that determines the comfort of the driver. Automatic transmission boxes use special blocks to manage shifts effectively and take into account information from other systems, as well as the driver’s input. This ensures accuracy and positioning. The following are a few gearbox advantages:
A gearbox creates a small amount of drag when pedaling, but this drag is offset by the increased effort to climb. The external derailleur system is more efficient when adjusted for friction, but it does not create as little drag in dry conditions. The internal gearbox allows engineers to tune the shifting system to minimize braking issues, pedal kickback, and chain growth. As a result, an internal gearbox is a great choice for bikes with high-performance components.
Helical gearboxes offer some advantages, including a low noise level and lower vibration. They are also highly durable and reliable. They can be extended in modular fashion, which makes them more expensive. Gearboxes are best for applications involving heavy loads. Alternatively, you can opt for a gearbox with multiple teeth. A helical gearbox is more durable and robust, but it is also more expensive. However, the benefits far outweigh the disadvantages.
A gearbox with a manual transmission is often more energy-efficient than one with an automatic transmission. Moreover, these cars typically have lower fuel consumption and higher emissions than their automatic counterparts. In addition, the driver does not have to worry about the brakes wearing out quickly. Another advantage of a manual transmission is its affordability. A manual transmission is often available at a lower cost than its automatic counterpart, and repairs and interventions are easier and less costly. And if you have a mechanical problem with the gearbox, you can control the fuel consumption of your vehicle with appropriate driving habits.

Application

While choosing a gearbox for a specific application, the customer should consider the load on the output shaft. High impact loads will wear out gear teeth and shaft bearings, requiring higher service factors. Other factors to consider are the size and style of the output shaft and the environment. Detailed information on these factors will help the customer choose the best gearbox. Several sizing programs are available to determine the most appropriate gearbox for a specific application.
The sizing of a gearbox depends on its input speed, torque, and the motor shaft diameter. The input speed must not exceed the required gearbox’s rating, as high speeds can cause premature seal wear. A low-backlash gearbox may be sufficient for a particular application. Using an output mechanism of the correct size may help increase the input speed. However, this is not recommended for all applications. To choose the right gearbox, check the manufacturer’s warranty and contact customer service representatives.
Different gearboxes have different strengths and weaknesses. A standard gearbox should be durable and flexible, but it must also be able to transfer torque efficiently. There are various types of gears, including open gearing, helical gears, and spur gears. Some of the types of gears can be used to power large industrial machines. For example, the most popular type of gearbox is the planetary drive gearbox. These are used in material handling equipment, conveyor systems, power plants, plastics, and mining. Gearboxes can be used for high-speed applications, such as conveyors, crushers, and moving monorail systems.
Service factors determine the life of a gearbox. Often, manufacturers recommend a service factor of 1.0. However, the actual value may be higher or lower than that. It is often useful to consider the service factor when choosing a gearbox for a particular application. A service factor of 1.4 means that the gearbox can handle 1.4 times the load required. For example, a 1,000-inch-pound gearbox would need a 1,400-inch-pound gearbox. Service factors can be adjusted to suit different applications and conditions.

editor by czh 2023-02-17