China 57HP Post Hole Digger Gearbox cycloidal drive efficiency

Solution Description

57hp Post Hole Digger Gearbox

1. Merchandise Description

 

MODEL
 
INPUT Data OUTPUT Info
Ratio Optimum Rpm KW HP-CV N.M N.M R.P.M
AC78845A/B 1:1.93 800 thirty forty 358 185 1544
RC one:1.93 800 thirty forty 358 185 1544
RC5/BB60X 1:1.69 800 37 50 440 260 1352
AC78846A/B 1:1.ninety three 540 55 seventy five 972 504 1042
612619 1:1.93 540 seventy four one hundred 1308 678 1042
612666 1:1.46 540 74 100 1308 896 680
BB84X 1:1.26 540 sixty seven 90 1184 940 680
RC81-000-01 one:1.923 540 seventy four one hundred 1308 680 1038
RC81-000-02 1:1.forty six 540 seventy four one hundred 1308 896 788
75356-192 one:1.92 540 97 130 1715 893 1037
75356-146 one:1.forty six 540 ninety seven a hundred thirty 1715 1175 788
74823-19 1:1.87 540 97 one hundred thirty 1715 918 1009
74823-fourteen 1:1.39 540 97 a hundred thirty 1715 1235 750
GT40U.B three:1 540 forty four sixty 778 2334 180
SF-one hundred one:one 540 fifteen twenty 265 265 540
MCT-100A1 seven.5:1 540 29.five 40 521 3912 72
MCT-100A2 22.5:1 540 29.5 forty 521 11738 24
DCR1-0000 two.4:one 540 37 50 654 1570 225

2. More Merchandise

3. The Drawing Of Equipment Box

four. Manufacturing and  Packing 

five.Shipping and delivery

6.Our Firm

HangZhou CZPT Tech.Machinery Co.,Ltd was  founded in 2003. It is located at  HangZhou County, HangZhou Metropolis, shut to 204 National Highway.Our principal items: 1. all  varieties of  drive shaft 2.all varieties of gera box 3. Farm machinery: IMT500  inorganic  fertilizer spreader,  HMT05S  organic fertilizer  spreader,  3M rotovator , 3M moist-paddy area rotary, King 185 deep cultviating  machine and so on. 4.The equipment parts: several varieties of Gear, Shaft, Flang, ,Equipment box, Laser elements, Stamping components and so on.
   

7. FAQ

1. Q: Are your goods cast or solid?

    A: All of our products are forged.

two. Q: What is actually your MOQ?
    A: twenty PCS for each type. We take the sample get. 
3. Q: What’s the horse energy of the pto shaft are obtainable? 
    A: We give a complete range of pto shaft, ranging from 16HP-200HP.
4. Q: How numerous splined specification do you have ?
    A: We create 1 1/8″-Z6, 1 3/8″-Z6, 1 3/4″-Z6, 1 3/8″- Z21, 1 3/4″-Z20, 8X42X48X8 and 8X32X38X6 splines.
5. Q: How about the guarantee?
    A: We promise 1 calendar year warranty. With quality problems, we will send you the new items for free within next cargo.
6. Q: What’s your payment phrases?
    A: T/T, L/C, D/A, D/P….
7. Q: What is the supply time?
    A: 40 times right after receiving your innovative deposit.

 

US $50-110
/ Piece
|
30 Pieces

(Min. Order)

###

Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car
Function: Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase
Layout: Cycloidal
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Step: Four-Step

###

Customization:

###

57hp Post Hole Digger Gearbox

###

MODEL
 
INPUT DATA OUTPUT DATA
Ratio Maximum Rpm KW HP-CV N.M N.M R.P.M
AC78845A/B 1:1.93 800 30 40 358 185 1544
RC 1:1.93 800 30 40 358 185 1544
RC5/BB60X 1:1.69 800 37 50 440 260 1352
AC78846A/B 1:1.93 540 55 75 972 504 1042
612619 1:1.93 540 74 100 1308 678 1042
612666 1:1.46 540 74 100 1308 896 680
BB84X 1:1.26 540 67 90 1184 940 680
RC81-000-01 1:1.923 540 74 100 1308 680 1038
RC81-000-02 1:1.46 540 74 100 1308 896 788
75356-192 1:1.92 540 97 130 1715 893 1037
75356-146 1:1.46 540 97 130 1715 1175 788
74823-19 1:1.87 540 97 130 1715 918 1009
74823-14 1:1.39 540 97 130 1715 1235 750
GT40U.B 3:1 540 44 60 778 2334 180
SF-100 1:1 540 15 20 265 265 540
MCT-100A1 7.5:1 540 29.5 40 521 3912 72
MCT-100A2 22.5:1 540 29.5 40 521 11738 24
DCR1-0000 2.4:1 540 37 50 654 1570 225
US $50-110
/ Piece
|
30 Pieces

(Min. Order)

###

Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car
Function: Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase
Layout: Cycloidal
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Step: Four-Step

###

Customization:

###

57hp Post Hole Digger Gearbox

###

MODEL
 
INPUT DATA OUTPUT DATA
Ratio Maximum Rpm KW HP-CV N.M N.M R.P.M
AC78845A/B 1:1.93 800 30 40 358 185 1544
RC 1:1.93 800 30 40 358 185 1544
RC5/BB60X 1:1.69 800 37 50 440 260 1352
AC78846A/B 1:1.93 540 55 75 972 504 1042
612619 1:1.93 540 74 100 1308 678 1042
612666 1:1.46 540 74 100 1308 896 680
BB84X 1:1.26 540 67 90 1184 940 680
RC81-000-01 1:1.923 540 74 100 1308 680 1038
RC81-000-02 1:1.46 540 74 100 1308 896 788
75356-192 1:1.92 540 97 130 1715 893 1037
75356-146 1:1.46 540 97 130 1715 1175 788
74823-19 1:1.87 540 97 130 1715 918 1009
74823-14 1:1.39 540 97 130 1715 1235 750
GT40U.B 3:1 540 44 60 778 2334 180
SF-100 1:1 540 15 20 265 265 540
MCT-100A1 7.5:1 540 29.5 40 521 3912 72
MCT-100A2 22.5:1 540 29.5 40 521 11738 24
DCR1-0000 2.4:1 540 37 50 654 1570 225

Cyclone Gearbox Vs Involute Gearbox

Whether you’re using a cycloidal gearbox or an involute gearbox for your application, there are a few things you should know. This article will highlight some of those things, including: cycloidal gearbox vs involute gearbox, weight, compressive force, precision, and torque density.helical gearbox

Compressive force

Several studies have been carried out to analyze the static characteristics of gears. In this article, the authors investigate the structural and kinematic principles of a cycloidal gearbox. The cycloidal gearbox is a gearbox that uses an eccentric bearing inside a rotating frame. It has no common pinion-gear pair, and is therefore ideal for a high reduction ratio.
The purpose of this paper is to investigate the stress distribution on a cycloidal disc. Various gear profiles are investigated in order to study the load distribution and dynamic effects.
Cycloidal gearboxes are subject to compression and backlash, which require the use of proper ratios for the bearing rate and the TSA. The paper also focuses on the kinematic principles of the reducer. In addition, the authors use standard analysis techniques for the shaft/gear and the cycloidal disc.
The authors previously worked on a rigid body dynamic simulation of a cycloidal reducer. The analysis used a trochoidal profile on the cycloidal disc periphery. The trochoidal profile is obtained from a manufacturing drawing and takes into account the tolerances.
The mesh density in the cycloidal disc captures the exact geometry of the parts. It provides accurate contact stresses.
The cycloidal disc consists of nine lobes, which move by one lobe per rotation of the drive shaft. However, when the disc is rotated around the pins, the cycloidal disc does not move around the center of gravity. Therefore, the cycloidal disc shares torque load with five outer rollers.
A low reduction ratio in a cycloidal gearbox results in a higher induced stress in the cycloidal disc. This is due to the bigger hole designed to reduce the material inside the disc.

Torque density

Several types of magnetic gearboxes have been studied. Some magnetic gearboxes have a higher torque density than others, but they are still not able to compete with the mechanical gearboxes.
A new high torque density cycloidal magnetic gearbox using Halbach rotors has been developed and is being tested. The design was validated by building a CPCyMG prototype. The results showed that the simulated slip torque was comparable to the experimental slip torque. The peak torque measured was a p3 = 14 spatial harmonic, and it corresponds to the active region torque density of 261.4 N*m/L.
This cycloidal gearbox also has a high gear ratio. It has been tested to achieve a peak torque of 147.8 Nm, which is more than double the torque density of the traditional cycloidal gearbox. The design incorporates a ferromagnetic back-support that provides mechanical fabrication support.
This cycloidal gearbox also shows how a small diameter can achieve a high torque density. It is designed with an axial length of 50mm. The radial deflection forces are not serious at this length. The design uses a small air gap to reduce the radial deflection forces, but it is not the only design option.
The trade-off design also has a high volumetric torque density. It has a smaller air gap and a higher mass torque density. It is feasible to make and mechanically strong. The design is also one of the most efficient in its class.
The helical gearing design is a newer technology that brings a higher level of precision to a cycloidal gearbox. It allows a servomotor to handle a heavy load at high cycle rates. It is also useful in applications that require smaller design envelopes.helical gearbox

Weight

Compared to planetary gearboxes, the weight of cycloidal gearboxes is not as significant. However, they do provide some advantages. One of the most significant features is their backlash-free operation, which helps them deliver smooth and precise movement.
In addition, they provide high efficiency, which means that servo motors can run at higher speeds. The best part is that they do not need to be stacked up in order to achieve a high ratio.
Another advantage of cycloidal gearboxes is that they are usually less expensive than planetary gearboxes. This means that they are suitable for the manufacturing industry and robotics. They are also suited for heavy-duty robots that require a robust gearbox.
They also provide a better reduction ratio. Cycloidal gears can achieve reduction ratios from 30:1 to 300:1, which is a huge improvement over planetary gears. However, there are few models available that provide a ratio below 30:1.
Cycloidal gears also offer more resistance to wear, which means that they can last longer than planetary gears. They are also more compact, which helps them achieve high ratios in a smaller space. The design of cycloidal gears also makes them less prone to backlash, which is one of the major shortcomings of planetary gearboxes.
In addition, cycloidal gears can also provide better positioning accuracy. In fact, this is one of the primary reasons for choosing cycloidal gears over planetary gears. This is because the cycloid disc rotates around a bearing independently of the input shaft.
Compared to planetary gearboxes, cycloidal gears are also much shorter. This means that they provide the best positioning accuracy. They are also 50% lighter, meaning that they have a smaller diameter.

Precision

Several experts have studied the cycloidal gearbox in precision reducers. Their research mainly focuses on the mathematical model and the method for precision evaluation of cycloidal gears.
The traditional modification design of cycloidal gears is mainly realized by setting various machining parameters and center position of the grinding wheel. But it has some disadvantages because of unstable meshing accuracy and uncontrollable tooth profile curve shape.
In this study, a new method of modification design of cycloidal gears is proposed. This method is based on the calculation of meshing backlash and pressure angle distribution. It can effectively pre-control the transmission accuracy of cycloid-pin gear. It can also ensure good meshing characteristics.
The proposed method can be applied in the manufacture of rotary vector reducers. It is also applicable in the precision reducer for robots.
The mathematical model for cycloidal gears can be established with the pressure angle a as a dependent variable. It is possible to calculate the pressure angle distribution and the profile pressure angle. It can also be expressed as DL=f(a). It can be applied in the design of precision reducers.
The study also considers the root clearance, the backlash of gear teeth and the profile angle. These factors have a direct effect on the transmission performance of cycloidal gear. It also indicates the higher motion accuracy and the smaller backlash. The modified profile can also reflect the smaller transmission error.
In addition, the proposed method is also based on the calculation of lost motion. It determines the angle of first tooth contacts. This angle is an important factor affecting the modification quality. The transmission error after the second cycloid method is the least.
Finally, a case study on the CZPT RV-35N gear pair is shown to prove the proposed method.helical gearbox

Involute gears vs cycloidal gears

Compared to involute gears, cycloidal gears have a lower noise, less friction, and last longer. However, they are more expensive. Cycloidal gears can be more difficult to manufacture. They may be less suitable for certain applications, including space manipulators and robotic joints.
The most common gear profile is the involute curve of a circle. This curve is formed by the endpoint of an imaginary taut string unwinding from the circle.
Another curve is the epicycloid curve. This curve is formed by the point rigidly attached to the circle rolling over another circle. This curve is difficult to produce and is much more expensive to produce than the involute curve.
The cycloid curve of a circle is also an example of the multi-cursor. This curve is generated by the locus of the point on the circle’s circumference.
The cycloid curve has the same diameter as the involute curve, but is tangentially curving along the circle’s diameter. This curve is also classified as ordinary. It has several other functions. The FE method was used to analyze the strain state of cycloidal speed reducers.
There are many other curves, but the involute curve is the most widely used gear profile. The involute curve of a circle is a spiraling curve traced by the endpoint of an imaginary tautstring.
Involute gears are a lot like a set of Lego blocks. They are a lot of fun to play with. They also have a lot of advantages. For example, they can handle center sifts better than cycloidal gears. They are also much easier to manufacture, so the cost of involute teeth is lower. However, they are obsolete.
Cycloidal gears are also more difficult to manufacture than involute gears. They have a convex surface, which leads to more wear. They also have a simpler shape than involute gears. They also have less teeth. They are used in rotary motions, such as in the rotors of screw compressors.
China 57HP Post Hole Digger Gearbox     cycloidal drive efficiencyChina 57HP Post Hole Digger Gearbox     cycloidal drive efficiency
editor by czh 2022-12-22